050-424-3188220 Datasheet, PDF (25/39 Pages) ITT Industries – RF Coaxial Connectors

RF Coaxial Connectors
AI-772 MCX Straight Connectors, Crimp Type for Braided Cable
Assembly Instructions
FERRULE
CONTACT
BODY ASSEMBLY
1. Trim cable to dimensions shown. Do not nick outer braid or center conductor. Tin center conductor
with solder (DO NOT OVER TIN).
2. Slide ferrule over stripped end of cable. Tin inside diameter of contact with solder. Slide contact
over center conductor while applying heat until contact butts on the dielectric of the cable.
3. Slide contact and cable into the body sub-assembly until the dielectric of the cable stops on the
insulator.
Assy Insts
4. Slide ferrule up over the cable braid until it touches the body. Crimp the ferrule in place as shown
using ITT Cannon Crimp Tool and suitable die set (see table).
Cable Type
RG178/U
RG316/U
Die Size
2,67 (.105)
3,25 (.128)
Dimensions are shown in mm (inch)
Dimensions subject to change 129