|
CA06COM-E18-1PWXX Datasheet, PDF (2/42 Pages) ITT Industries – Industrial Connectors | |||
|
◁ |
CA-COM
Introduction
ITT Industries, Cannon connectors series
CA-COM and CA-COM-B are derivations of
connectors according to MIL-C-5015 or
VG95234. They were developed especially
for industrial applications. Connectors of
both CA-COM series are interchangeable
with the corresponding types as per MIL-
C-5015 and VG95234, as they offer the
same mounting dimensions and contact
arrangements.
The CA-COM and CA-COM-B connector
series offer
⢠Wall mounting receptacles
⢠Cable connecting plugs
⢠Box mounting receptacles
⢠Straight plugs
⢠Plugs 90°
Wall mounting receptacles and cable
connecting plugs (straight and 90°) are
available with
⢠Endbell with cable clamp
⢠Endbell for flex tubes
⢠Adapter combined for PG terminations
acc. to DIN 46320
⢠Adapter for heat shrink boots
Furthermore Cannon also provides the
appropriate accessories like
⢠Protective metal caps
⢠Sash chains
⢠Cable clamps
⢠Cable bushings
⢠Sealing gaskets
CA-COM
⢠Threaded coupling
⢠Mateable with all connectors according
to MIL-C-5015 and series CA respec-
tively
⢠Either solder or crimp contacts
⢠Contact arrangements with 1 to 37
contacts
⢠Wire sizes from 0,14 up to 2,5 mm2
⢠Shells made of aluminum alloy enable
to withstand high mechanical strain*
⢠Surface protected by nickel plating
⢠Resilient insulator (polychloroprene)
for wide temperature range
(â55/125°C)
⢠Resistant against aggressive fluids like
fuel, oil, etc.
⢠Environmental by means of an adapter
for PG termination, universal endbell
and heat shrink boots
⢠Min 500 mating cycles
⢠Spray-waterproof IP67
CA-COM-B
⢠Bayonet coupling
⢠Mateable with all connectors according
to VG95234 and series CA-B respec-
tively
⢠Either solder or crimp contacts
⢠Contact arrangements with 1 to 37
contacts
⢠Wire sizes from 0,14 to 2,5 mm2
⢠Shells made of aluminum alloy enable
to withstand high mechanical strain*
⢠Surface protected by nickel plating
⢠Resilient insulator (polychloroprene)
for wide temperature range
(â55/125°C)
⢠Resistant against aggressive fluids like
fuel, oil, etc.
⢠Environmental by means of an adapter
for PG termination, universal endbell
and heat shrink boots
⢠Min 500 mating cycles
⢠Waterproof (1 bar, 12 hours)
Contents
Introduction ........................................... 2
Connector design .................................. 2
Technical data ........................................ 3
How to order ........................................ 4
Contact arrangements. .......................... 5
Mounting dimensions ........................... 10
Separating and coupling dimensions .... 11
Shell styles and dimensions .................. 12
Accessories ............................................ 33
Contact dimensions .............................. 37
Tools ..................................................... 38
Product safety information ................... 40
Note: * Receptacle size 14S and barrels size 18 + 20 are made of Zinc dicast
material.
All dimensions are in mm
2
Subject to changes
|
▷ |