031-1287-000 Datasheet, PDF (2/19 Pages) ITT Industries – ARINC 600 BKAD/E/F

ARINC 600
How to Order
BKAD/E/F
CONNECTOR SERIES
RoHS
CLASS
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
BKA R D 2 A234 M
3 00 01 * F0
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
* = For Polarizing Position greater then 99, add third digit.
CONNECTOR SERIES
BKA (Per ARINC 600)
RoHS version
R - RoHS compatible
CLASS
D - Non-environmental (rear release, crimp
contacts)
E - Environmental (rear release, crimp contacts)
F - Non-environmental (front release, solder
and wrap post #22 contact, rear release
all others)
C - Same as E, except uses BKAD shells and
Less 0 rings on plug side.
T - Non-environmental connector using filtered
contacts
SHELL SIZE
1 - Max. contact capacity - 125
2 _- Max. contact capacity - 400
3 _{- Max. contact capacity - 800}
CONNECTOR LAYOUT DESCRIPTION
(See page 8)
SIZE 1 COAX INSERT MODIFIER
M - Connector contains modified 71W1 or
2W2 insert (four MTG screw hole
locations and coaxial contact used in this
insert are interchangeable between
different manufacturers
SHELL STYLE
3 - Plug (rack side)
4 - Receptacle (box side)
CONNECTOR MOUNTING MODIFIER
00 - Standard design, .148 dia. holes
01 - With #6-32 ESNA (#12 NCFMA2-62) clinch
nuts (see chart)
02 -
03 -
08 -
09 -
22 -
23 -
Connector
Size
1
Number of Clinch Nuts
Plug
4
Receptacle
4
2
4
6
3
8
10
Size 1 receptacle only - less 3 printed circuit
board mounting lugs
With #4-40 ESNA (#22 NCFMA2-40) clinch
nuts (see chart)
Size 2 and 3 plug and receptacle only - with
#4-40 ESNA (#22 NCFMA2-40) clinch nuts
(all mounting holes)
Size 2 and 3 plug and receptacle only - with
#6-32 ESNA (#12 NCFMA2-62) clinch nuts
(all mounting holes)
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with non-environmental inserts.
With floating eyelets (.048 min. radial float)
4 corner holes per connector.
NOTE: A dash must be inserted whenever code does not apply.
Consult Customer Service if other modifications are required
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
5