D20419-121 Datasheet, PDF (12/28 Pages) ITT Industries – D Subminiature Accessories

D Cannon D-Subminiature Accessories
Locking Hardware for Snap -Together Plastic Backshell
Recessed Jackscrew
Extended Jackscrew
Plastic Backshell
Thumbscrew
4,50
(.177)
DIA.
13,50 (.531)
9,00
(.354)
#4-40
Threads
6,00
(.236)
MIN.
Materials and Finishes
Part Number
250-8501-004
250-8501-009 (M3) ,250-8501-010 (#4-40)
250-8501-013
19,00 (.748)
4,30
(.169)
9,00
(.354)
#4-40
Threads
4,10
(.161)
DIA.
6,00
(.236)
MIN.
50,00 (1.969)
4,30 (.169)
Material
Brass
Brass
Brass
Finish
Nickel
Nickel
Nickel
Quantity Required
per Connector
2
2
2
9,00 (.354)
6,00 (.236)
#4-40
THREADS
Jackpost for In-Line Connections
Rectangular Nut
5,00
(.197)
5,00
(.197)
4,60
(.189)
Jackpost
11,00
(.433)
6,00
(.236)
4,90 (.193)
3,00 (.118)
MIN
Jackpost Assembly
1,81
(.075)
#4-40 UNC-2B
6,00
(.236)
#4-40 UNC-2B
#4-40 UNC-2A
5,00
(.197)
(ACROSS FLATS)
Straight Exit - Metalized Plastic Low Cost
C
Assembly consists of 1 rectangular nut,
1 jackpost, 1 # 4-40 lock washer.
Part Number:
Material:
Finish:
Quantity required
per connector:
D121073-19
Brass
Nickel
2
50 POSITION IS MARKED
“CANNON” ONLY
• Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
F
B
ITT CANNON
ØE
D
A
Shell
Part
Size Layout Number
DE 9 980-2000-350
DA 15 980-2000-351
DB 25 980-2000-352
DC 37 980-2000-353
DD 50 980-2000-354
A
B
30,91 (1.217) 39,29 (1.547)
39,24 (1.545) 38,23 (1.505)
53,09 (2.090) 42,04 (1.655)
69,44 (2.734) 46,48 (1.830)
67,18 (2.645) 47,12 (1.855)
C
16,26 (.640)
16,26 (.640)
18,03 (.710)
23,01 (.906)
23,88 (.940)
D
16,26 (.640)
16,26 (.640)
16,26 (.640)
16,26 (.640)
19,56 (.770)
øE
F
10,16 (.400) 24,99 (.984)
10,16 (.400) 33,32 (1.312)
13,26 (.522) 47,17 (1.857)
18,44 (.726) 63,50 (2.500)
18,44 (.726) 61,11 (2.406)
Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
10