Y100132A203NQ Datasheet, PDF (1/8 Pages) ITT Industries – 4, 5 & 6 Tumbler Switchlocks

C&K Y Series
4, 5 & 6 Tumbler Switchlocks
Features/Benefits
• Anti-static switch—exceeds
20 KV DCstatic resistance
• Momentary models available
• Wire leads and harnesses available
Typical Applications
• Point-of-sale terminals
• Cash registers
• Computers
Models Available
Patent No. 4,639,562
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page M-9 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º or 90º, 2-4 positions (4&5 tumbler switchlocks).
45º, 3 positions; or 90º, 2 positions (6 tumbler tubular
switchlocks).
Other functions available, consult Customer Service Center.
STATIC RESISTANCE: Anti-static models exceed 20 KV DC static
resistance @ sea level, lock body to terminals.
MOUNTING TORQUE: 10 in./lbs.; 14 in./lbs max.
Materials
LOCK: Zinc alloy with stainless steel facing, std. (4 & 5 tumbler lock
and 6 tumbler tubular lock).
KEYS: Two nickel plated brass keys, with code number, std.
(4 and 5 tumbler lock). Two die cast chrome plated zinc alloy
keys,std. (6 tumbler lock).
SWITCH HOUSING: Glass filled polyester (UL 94V-0).
CONTACTS AND TERMINALS: Q contact material: Copper, silver
plated. See page M-9 for additional contact materials.
MOUNTING NUT: Zinc alloy.
MOUNTING CLIP: Steel, zinc plated.
DRESS NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switchlocks with standard options.
For information on specific and custom switchlocks, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages M–4 through M–10. For additional options not shown in catalog, consult Customer Service Center.
Switch and Lock Function
Y10013 SP, 45°, keypull pos. 1
Keying
Y1011U SP, 90°, keypull pos. 1 & 2
2 Two nickel plated brass keys (4 &
Y1001U SP, 40°, keypull pos. 1 & 3
5 tumbler) or two die cast zinc alloy keys with
Y2001U DP, 40°, keypull pos. 1 & 3
chrome plating (6 tumbler)
Y10082 SP, 40°, keypull pos. 1
Y20082 DP, 40°, keypull pos. 1
6 Two nickel plated brass keys with code on lock face
Lock Type
M
Y100AA SP, 40°, keypull pos. 1, 2 & 3
A 4 Tumbler lock (YXO8 models)
Y200AA DP, 40°, keypull pos. 1, 2 & 3
C 4 Tumbler lock with detent
Y100AB SP, 40°, keypull pos. 1, 2, 3 & 4 _{V 6 Tumbler tubular lock}
Y200AB DP, 40°, keypull pos. 1, 2, 3 & 4 _{B 5 Tumbler lock}
Y10113 SP, 90°, keypull pos. 1
R 4 Tumbler lock with detent and anti-Static switch
Y20113 DP, 90°, keypull pos. 1
W 6 Tumbler tubular lock with anti-Static switch
Y1011C SP, 90°, keypull pos.2
Y2011C DP, 90°, keypull pos. 2
Lock Finish
Y2011U DP, 90°, keypull pos. 1 & 2
2 Stainless steel facing
Y14173 SP, 90°, keypull pos. 1
8 Gloss black facing
Y1417U SP, 90°, keypull pos. 1,2 & 3
F Polished nickel facing
Y10812 SP, 40°, mom., keypull pos. 1
Y20812 DP, 45°, mom., keypull pos. 1
Y19073 SP w/common, 90°, keypull pos. 1
Y1907U SP w/common, 90°, keypull pos. 1, 2 & 3
Y1900S SP w/common, 90°, keypull pos. 1, 2, 3 & 4
Terminations
03 Solder lug with hole
01 Solder lug with notch
02 PC Thru-hole
07 Solder lug with hole
(Y19OXX models only)
WC Wire lead
Contact Material
Q Silver
B Gold
G Gold over silver
Seal
Mounting/Lock Style
N With nut
NONE No seal
E Epoxy seal
D With clip
L With removable dress nut and latch pawl
R With removable dress nut
M–3
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com