TD1E9LPH-C Datasheet, PDF (1/3 Pages) ITT Industries – Filter Connectors

MIL-C-24308 Filter Connectors
TD1*
How to Order
ITT Cannon has developed a line of filter connectors
to meet the industry's demand fo improved control
of Radio Frequency and Electro-Magnetic Inter-
ference (RFI/EMI). These TD1* filter connectors,
have been designed to combine the functions of a
standard electrical connector and feed-thru filters
into one compact package. In addition to offering
greater design flexibility and system reliability, they
are designed for applications where space and
weight are prime considerations. These connectors
are intermateable with all standard D subminiature
connectors. They are also intermateable with MIL-
C-24308 types and meet applicable portions of that
specification.
ALL TD1* filter contact assemblies are tested 100%
during in-process and final inspection, for capac-
itance, insulation resistance and dielectric with-
standing voltage. Attenuation is checked as re-
quired for each type of filter to assure performance
to guaranteed levels.
Note: The TD1* replaces the obsolete TD*J and D*J Series
FILTER SERIES INDICATOR
T - Transverse Monolith
SERIES PREFIX
D - Miniature, rectangular, solder termination
SHELL SIZE (one piece shell)
E, A, B, C, D
CONTACT ARRANGEMENTS
See page 305
FILTER SERIES INDICATOR
SERIES PREFIX
ONE (1) PIECE SHELL
SHELL SIZE
CONTACT ARRANGEMENTS
FILTER TYPE
CONTACT TYPE
CONTACT TERMINATION
MODIFIER
FILTER TYPE
L - Low frequency
M - Mid-range frequency
T - Standard frequecy
H - High frequency
CONTACT TYPE
P - Pin contacts
S - Socket contacts
Performance and Material Specifications
ELECTRICAL DATA
Available Filter
Catalog Indication - letter
Voltage Rating (working)
Current Rating (amp DC)
Insulation Resistance, 2 min. electrification
time max. at 25˚C, and 100 VDC
DWV, sea level, with 500 microamps max.
charge/discharge
Capacitance at 1 KHz, 0.1 V rms picofarads
Attenuation per MIL-STD-220
@ 25˚C with no applied
voltage or current.
Filter Type
Low Freq.
L
100 VDC
7.5
5000
megohms
minimum
300 VDC
Freq. MHz
0.1
1
2
10
100
500 to 10,000
50,000
minimum
2 min.
15 min.
20 min.
35 min.
60 min.
65 min.
Pi
Mid Freq.
M
7.5
10,000
megohms
minimum
500 VDC
Std Freq.
T
200 VDC
7.5
10,000
megohms
minimum
500 VDC
7200
12,000
3000
5,000
Attenuation (dB)
-
-
2 min.
-
5 min.
2 min.
15 min.
9 min.
55 min.
50 min.
60 min.
55 min.
Pi
Pi
High Freq.
H
7.5
10,000
megohms
minimum
500 VDC
780
1,300
-
-
2 min.
30 min.
50 min.
Pi
TD 1E 9 L P H -C
A 15 M S M
B 25 T
P
C 37 H
D 50
PRINTED CIRCUIT CONTACTS
Consult factory. Both 90˚ and straight types are
available.
CONTACT TERMINATION
See page 305
Lack of termination indicator signifiles solder cup.
MODIFIER
C - Clinch nut
MATERIALS AND FINISHES
Description
Material
Contacts
Copper alloy
Finish
Gold plate per
MIL-G-45204
Type 1, Class 1
Shell
Aluminum alloy 6061-T6 Electroless nickel per
per QQ-A-225/8 or
MIL-C-26074
QQ-A-200/8
Insulator: Socket ^{Polyphenylene Sulfide/ None}
Epoxy
Pin
Epoxy
None
Ground Spring Beryllium Copper
Silver plate
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
304