SDA01H0BD Datasheet, PDF (1/3 Pages) ITT Industries – Low Profile DIP Switches

C&K SDA Series
Low Profile DIP Switches
Features/Benefits
Typical Applications
• Low profile design saves space
• Address switch for industrial
I
• Thru-hole and surface mount models
controls
• High pressure contact does not
• Logic switching for computers
require tape sealing
and peripherals
• Tape and reel packaging available
• RoHS compliant - options available
• Function controlling for
numerous applications
How To Order
Complete part numbers for SDA Series are shown on pages I–6 through I–8. All switches supplied in “OFF” position.
Specifications
CONTACT RATING: 25 mA @ 24 V DC or 100 mA @ 50 V DC.
MECHANICAL AND ELECTRICAL LIFE: 1,000 cycles at rated loads.
CONTACT RESISTANCE: 50 milliohms max. initial.
INSULATION RESISTANCE: 100 megohms between terminals.
DIELECTRIC WITHSTANDING VOLTAGE: 300 V DC min. for 1 minute.
STORAGE TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -20°C to 85°C.
OPERATING FORCE: 800 grams max.
SOLDERABILITY: Dip and look solderability testing per C&K
spec. #448. Unplated edges of terminals permitted.
PACKAGING: Switches supplied in rigid dispensing tubes in full-
tube quantities only, this may affect order quantity. Numbers
of switches per tube varies with model. Tape and reel pack-
aging also available.
Materials
HOUSING: Tin Lead, Version PPA (UL94V-0).
RoHS, Version PPS, color black (UL94V-0).
COVER: PPA color: Red (UL 94V-0).
RoHS, version PPS, color black (UL94V-0).
ACTUATOR: PA6T (UL94-0)
CONTACTS: Gold plated Beryllium copper.
TERMINALS: Tin lead plated brass. RoHS,
gold plate over nickel plated brass.
TAPE SEAL: Polyimide.
NOTE: For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
Note: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Flush Actuator – No Tape, Thru-hole Terminals
SDA08H0KD
.189
(4,80)
DIM 'A'
12345678
.051
(1,30)
.106
(2,70)
Ø.031
(0,8)
TYP.
.100
(2,54)
TYP.
.300 TYP.
(7,6)
.295
(7,49)
.063
(1,60)
.024
(0,61)
.100
(2,54)
.320
(8,13)
.010
(0,25)
ROHS
PART NUMBER
SDA01H0BD
SDA02H0BD
SDA03H0BD
SDA04H0BD
SDA05H0BD
SDA06H0BD
SDA07H0BD
SDA08H0BD
SDA09H0BD
SDA10H0BD
SDA12H0BD
Schematic
TIN LEAD
PART NUMBER
NO.
POS. DIM. ‘A’
QUANTITY
PER TUBE
SDA01H0KD 1 .178 (4,52)
100
SDA02H0KD 2 .278 (7,06)
60
SDA03H0KD 3 .378 (9,60)
45
SDA04H0KD 4 .476 (12,10)
35
SDA05H0KD 5 .578 (14,68)
30
SDA06H0KD 6 .676 (17,18)
25
SDA07H0KD 7 .778 (19,76)
20
SDA08H0KD 8 .876 (22,26)
20
SDA09H0KD 9 .978 (24,84)
15
SDA10H0KD 10 1.076 (27,34)
15
SDA12H0KD 12 1.279 (32,50)
14
SPST
Dimensions are shown: Inch (mm )
Specifications and dimensions subject to change
I-6
www.ittcannon.com