RBP-12112SNFS Datasheet, PDF (1/4 Pages) ITT Industries – 1-6 Pole Miniature Rotary Switches

C&K RBP12 Series
1-6 Pole Miniature Rotary Switches
Features/Benefits
• Rotary switch for low current
• Shaft perpendicular to PCB
• Index mechanism included in
thickness of switch
• Several actuation modes
• Low profile
Typical Applications
• Medical
• Instrumentation
• Appliances
Mechanical Data
Max. number of banks
Operating torque
Stop strength
End stop
Contact material
Insulating material
1
2.5 Ncm ± 25% (1 pole)
> 40 Ncm
With/without or mobile
Silver, Gold
Thermoplastic
NOTE: For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches
with standard options. For informationon specific and custom
switches, consult Customer Service Center.
Electrical Data
Silver (S)
Gold (G)
Switching mode
MBB-BBM
MBB-BBM
Make Before Break, Break Before Make
Max. switching power
5 VA (resistive)
0.5 VA (resistive)
Max. switching current
130 mA
20 mA
Max. carrying current
Contact resistance
3A
< 15 m ohms
3A
< 25 m ohms
Dielectric strength
at 50 Hz
between contacts 1000 V
or contacts and ground 1000 V
1000 V
1000 V
Nominal voltage
150 V rms
150 V rms
Number of operations
Insulation resistance between contacts
and contacts and frame (500 Vcc)
15 ,000
> 5 x 10⁹ ohms
20 ,000
> 5 x 10⁹ ohms
Environmental data
Storage temperature
Salt spray
– 25°C to + 70°C
NA
– 25°C to + 85°C
48 H
Further data
Solderability
Cleaning
Hand:
Wave:
350°C/5 s
260°C/5 s max.
Cleaning of modules prohibited
L _{Build-A-Switch}
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L-19 thru L-21. For additional options not shown in catalog, consult Customer Service Center.
Designation
RBP12
Switch Function
112S SP, 30° Index, 12 pos. no stop
103B03 SP, 30° Index, 3 pos.
105B05 SP, 30° Index, 5 pos.
107B07 SP, 30° Index, 7 pos.
108B08 SP, 30° Index, 8 pos.
Switching Mode
N Non-shorting BBM (break-before-make)
C Shorting, MBB (make-before-break)
110B10 SP, 30° Index, 10 pos.
112B12 SP, 30° Index, 12 pos.
206S DP, 30° Index, 6 pos. no stop
202B02 DP, 30° Index, 2 pos.
203B03 DP, 30° Index, 3 pos.
205B05 DP, 30° Index, 5 pos.
304B04 3P, 30° Index, 4 pos.
Actuator
F Screwdriver slot*
AD Plastic shaft, <20mm (.787)*
S Plastic shaft, 6mm (.236)*
M Thumbwheel
403B03 4P, 30° Index, 3 pos.
Option
602B02 6P, 30° Index, 2 pos.
(NONE)
P Lateral PCB adaptation
Contact Material
S Silver
G Gold
*Option: Metallic shaft available by request
L–18
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com