MJSB-26PH001 Datasheet, PDF (1/5 Pages) ITT Industries – Micro Center Jackscrew

Micro Center Jackscrew
MJS
The MJS jackscrew series provides a reliable interconnect for board-to-board,
board-to-cable and in-line cable-to-cable applications. Layouts accommodating
up to 76 MICROPIN/MICROSOCKET^TM contacts are available, with the same
wide range of options as are offered with the other MICRO Line products offered
in this catalog.
How to Order
SERIES
MJS - Micro Center Jackscrew
INSULATOR MATERIAL
B - Diallyl phthalate
V - Polyester
U - Polyetherimide
R - Polyphenylene sulfide
CONTACT ARRANGEMENTS
Unshrounded Receptacle: 10, 26, 51, 66
Shrouded Receptacle; 10, 26, 34, 38, 42, 76
Low Profile Plug and Receptacle
(shrouded): 28
RoHS COMPLIANCE
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODES
CONTACT TYPE
P - Pin
S - Socket
TERMINATION TYPE
H - Insulated wire harness.
I - Integral tail (MJSV-28S only).
L - Solid - uninsulated wire.
S - Solder pot to accept #26 AWG
harness wire.
T - Thru bundle pigtail (MJSV-28P only).
R MJS * - 26 P H 001
TERMINATION CODE*
(H) 001 - 18" , 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681
System I.
(L) 1
- 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2
- 1" uninsulated solid #25 AWG
gold plated copper.
* See Termination Codes shown below.
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.
Harness Type (H)
#26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded.
Length
All Yellow
Color Coded
3 (76.2)
H 020
H 027
6 (152.4)
H 019
H 016
8 (203.2)
H 026
H 034
10 (254.0)
H 029
H 025
12 (304.8)
H 028
H 002
18 (457.2)
H 001
H 003
20 (508.0)
H 038
H 023
Length
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
All Yellow
H 009
H 010
H 011
H 013
H 017
H 042
Color Coded
H 004
H 005
H 006
H 048
H 046
H 041
Solid Uninsulated Type (L)
#25 AWG gold plated solid copper.
Termination
Termination
Code
Length
Code
Length
L61 .125 (3.18) L14 .750 (19.05)
L56 .150 (3.81) L2 1.000 (25.40)
L57 .190 (4.83) L7 1.500 (38.10)
L39 .250 (6.35) L6 2.000 (50.80)
L58 .375 (9.53) L16 2.500 (63.50)
L1
.500 (12.70) L10 3.000 (76.20)
Contact Arrangements
Face view of pin-use reverse order for socket
4
1
6
5
12
14
10
7
26
10 Contacts
1
13
15
26 Contacts
17
34
51
1
18
35
21
44
66
51 Contacts
1
23
45
66 Contacts
MJSB/MJSU (unshrouded)
Identification numbers are for reference only and do not appear on connectors.
1
61
7
10 11
11
16 19
16 Contacts**
10
18
28
28 Contacts**
1
12
13
22
23
34
*Low profile configuration
**MJSV & MJSR
34 Contacts
MJSV (shrouded)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
39