MIL1112SNSD25 Datasheet, PDF (1/4 Pages) ITT Industries – 1-4 Pole Miniature Right

C&K MIL Series
1-4 Pole Miniature Right
Features/Benefits
Typical Applications
• Bushing option for panel mounting • Telecom switching equipment
• 1 to 4 poles per bank and up to
• Military communications
5 banks per switch
• Instrumentation
• Totally sealed (insert molded contacts _{• Medical monitors}
and terminals)
• Low profile – 12 mm above PCB
Specifications
CONTACT RATING: Switch: 20 mA, 1 VA max. resistive load
Carry: 1 AMP.
ELECTRICAL LIFE: 20,000 operations.
OPERATING TORQUE: < 6 Ncm.
STOP STRENGTH: > 50 Ncm.
CONTACT RESISTANCE: < 40 mΩ
INSULATION RESISTANCE: 109 Ω
DIELECTRIC STRENGTH: 500 V rms
OPERATING TEMPERATURE: –40ºC to + 85ºC
STORAGE TEMPERATURE: –55ºC to + 85ºC
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
HOUSING: Thermoplastic (nylon) and thermoset (diallyl phthalate)
ACTUATOR: Steel
MOVABLE CONTACTS: Brass, gold plated.
ROTOR: Thermoset (polysulfone)
O-RING: Silicone
STATIONARY CONTACTS & TERMINALS: Brass, gold plated.
TERMINAL SEAL: Totally sealed (insert molded).
BUSHING: Brass
STOP PIN: Stainless steel
HARDWARE: Nut: Brass, nickel plated. Washer: Brass, nickel plated.
Gasket: Neopren.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-23 thru K-25. For additional options not shown in catalog, consult Customer Service Center.
K
Designation
MIL
Number of Banks
1 (STD.) 1 Bank
2 2 Banks
3 3 Banks
Switch Function
4 4 Banks
112S (STD.) SP, 30° Index, 12 pos. no stop
5 5 Banks
102B02 SP, 30° Index, 2 pos.
103B03 SP, 30° Index, 3 pos.
104B04 SP, 30° Index, 4 pos.
105B05 SP, 30° Index, 5 pos.
Switching Mode
N (STD.) Non-shorting BBM (break-before-make)
C Shorting, MBB (make-before-break)
106B06 SP, 30° Index, 6 pos.
Mounting Style
107B07 SP, 30° Index, 7 pos.
SD (STD.) Without panel mount
108B08 SP, 30° Index, 8 pos.
AD (STD.) With panel mount
109B09 SP, 30° Index, 9 pos.
110B10 SP, 30° Index, 10 pos.
111B11 SP, 30° Index, 11 pos.
112B12 (STD.) SP, 30° Index, 12 pos.
Actuator Option
(NONE) (STD.) 4 mm diameter shaft
M10X3 4 mm shaft with flat
F2X1 4 mm shaft with screwdriver slot
206S (STD.) DP, 30° Index, 6 pos. no stop
202B02 DP, 30° Index, 2 pos.
Actuator Option Angle*
203B03 DP, 30° Index, 3 pos.
(NONE) (STD.)
204B04 DP, 30° Index, 4 pos.
K0 0° angle
205B05 DP, 30° Index, 5 pos.
206B06 (STD.) DP, 30° Index, 6 pos.
303S 3P, 30° Index, 3 pos. no stop
K30 30° angle
K60 60° angle ^{Actuator Option Length**}
K90 90° angle ^{25 (STD.) 25 mm standard shaft}
302B02 3P, 30° Index, 2 pos.
K120 120° angle
303B03 3P, 30° Index, 3 pos.
K180 180° angle
402S 4P, 30° Index, 2 pos. no stop
K270 270° angle
402B02 4P, 30° Index, 2 pos.
* Other angles available by request
** Other lengths available by request.
K-22
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com