LPCCP1 Datasheet, PDF (1/1 Pages) ITT Industries – Antenna Interconnect for Satellite TV Receiver Mobile Phones PDA Portable Radio

Mobile
The LPC CP1/CP2 RF switchable
connectors are ideal for small
handsets and offer high performance
in a very compact design and a unique cold
pin to minimize the RF emissions in unmated
conditions.
Applications:
• ^{Antenna Interconnect for Satellite TV}
Receiver
• ^{Mobile Phones}
• ^PDA
• ^{Portable Radio}
RF: LPC CP1/CP2
For more information: www.ittcannon.com/cat264
Product Features
• ^{Cold pin to minimize RF emissions in}
unmated conditions.
• ^{Low profile of 5,6 mm.}
Performance Specifications
• ^{0.2 g weight.}
• ^{100% checked on assembly.}
• ^{Seal to prevent dust and water penetration.}
• ^{Standard tape and reel packaging.}
Connector Durability
Corrosive Atmosphere
Frequency Range
Humidity
Impedance
Insertion Loss
Mating Force
Maximum Dimensions
Offset Mating
Operating Temperature
Packaging
Salt Spray
Shock
Solder System
Vibration
VSWR
12,000 mating cycles min.
Battele class II
0.8 to 2 GHz
Operable in 90% relative humidity, temp. 40°C (104°F)
50 Ω nominal
at 0.8 to 2 GHz <0.1 dB
>4 N and <7 N (when mated with plug)
3.5 x 5.1 x 5.6 mm (H x W x D)
0.95 mm
–40°C to 85°C (–40°F to 185°F)
Tape and Reel, 13 in. Reel, 1000 pieces per reel
In accordance with IEC 68-2-11, Method Ka
105 g (force) 6 directions over 3 axis
Hand soldering, Infrared reflow soldering
Ï©3 dB/octave 20 to 80 Hz
0.53 g ²/Hz 80 to 350 Hz
Ï©3 dB/octave 350 to 2000 Hz
at 2000 MHz ≤1.2:1
Materials and Finishes
Description
Shell
Insulator
Contact, Fixed
Contact, Moving
Cold Pin
Gasket
Material
Brass
LPC Resin
Brass
Beryllium Copper
Brass
Silicone Rubber
Finish
Gold
Color: Black
Gold
Gold
Gold
Color: Black
Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs
Version 05.01.03
M-10
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com