KT11P2SA3M33 Datasheet, PDF (1/4 Pages) ITT Industries – Right Angle Sealed Tact Switch for SMT

KT Series
Right Angle Sealed Tact Switch for SMT
Features/Benefits
• High shear force with extended bracket
• Easy to pick & place with top
plate tab
• Rubber or hard plastic actuator
• Press fit or snap fit caps
Typical Applications
• Telecommunications
• Computer products
• Instrumentation
• Power supply
Specification
B
CONTACT ARRANGEMENT: SPST, N.O.
TERMINALS: Gullwing type for SMT
Electrical
CONTACT RATING: 1.0 VA max. @ 50 V AC or DC max.
ELECTRICAL & MECHANICAL LIFE: 100,000 make-and-break
cycles at full load.
DIELECTRIC STRENGTH: 250 Vrms min. @ sea level.
CONTACT RESISTANCE: Below 50 mΩ typ. initial @
2-4 V DC, 100 mA.
INSULATION RESISTANCE: 10⁹ Ω min.
NOTE: Specifications listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Environmental
OPERATING TEMPERATURE: -40˚C to 90˚C
Process
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; protection against harmful dust
deposits, full-scale voltage protection, temporary immersion.
Packaging
Switches supplied in rigid dispensing tubes or anti-static tape and
reels per EIA 481-2 (800 pieces per reel.). Tape and cover strip are
conductive for use near statically sensitive components.
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired
option from each category and place it in the appropriate box.
SWITCH
KT1 1
Actuator
B0 Soft, flush
B1 Soft, 0,64 mm
B2 Soft, 2,24 mm
P2 Hard, 2,36 mm
P3 Hard, 1,50 mm
P4 Hard, 3,96 mm
Orientation
S Side actuated
S1 ø0,1 mm for caps
S2 ø0,14 mm with anti-rotation
Mounting Bracket
AM Right angle
Contact Plating
1 Silver
3 Gold
Actuating Force
3 3 N (300 grams)
A1M Right angle with front solder pad
A2M Right angle with front solder pad pick & place tab
A3M Right angle with pick & place tab
Color
(NONE) No cap
0380 Snap fit,
high temperature,
ivory, ø8 mm
BUTTON
To order buttons in bulk
BTNKT 1 1
Button Type
Button Color
02 Press fit, ø4 mm
90 Black
03 Snap fit, high temperature, ø8 mm 80 Ivory
B-28
Dimensions are shown: mm (inch)
Dimensions subject to change
www.ittcannon.com