|
K12115NOD Datasheet, PDF (1/6 Pages) ITT Industries – High Performance Key Switches | |||
|
K12
High Performance Key Switches
Features/Benefits
Typical Applications
⢠Excellent tactile feel
⢠Automotive
⢠Wide choice of LED colors,
travel and actuator forces
⢠High reliability / long life
⢠Sealed version available
⢠Off-road transportation
⢠Industrial electronics
⢠Computers & network equipment
⢠Designed for low-level switching
⢠Double stroke version available
⢠Detector version available
Construction:
FUNCTION: momentary
DISTANCE BETWEEN BUTTON CENTERS:
min. 11 (0.433) K12C = 13 (0.512)
TERMINALS: PC pins, tinned
MOUNTING: Locating pins; K12D, K12G and K12P additionally
with snap-in housing
Mechanical
TOTAL TRAVEL: 1 mm, 1,5 mm, 2 mm
SWITCHING TRAVEL: 0,6 mm*
OPERATING FORCE: 1.5 N OD without snap-point as detector
switch, 2.5 N, 3.5 N, 5 N, 3.5/7 N, 6/12 N
PROTECTION CLASS: K12C IP 67 (dust tight, protected against
the effects of immersion in water; other versions IP 50)
* Additional switching travel (with pre-travel) available by request.
NOTE: Product to be offered compliant and compatible on Q1 2006.
Electrical
SWITCHING POWER MIN./MAX.: 0.02mW/3 W
SWITCHING VOLTAGE MIN./MAX.: 2 V DC / 30 V DC
SWITCHING CURRENT MIN./MAX.: 10 µA /100 mA
DIELECTRIC STRENGTH (50 Hz, 1 min): ⥠500 V
OPERATING LIFE with max. switching power: ⥠106 operations
K12G & K12GO; operating life of second switch 5 x 104 operations
CONTACT RESISTANCE: Initial ⤠50 mâ¦
INSULATION RESISTANCE: ⥠1010 â¦
BOUNCE TIME: ⤠1 ms
Operating speed 400 mm/s (15.75/s)
Environmental
OPERATING TEMPERATURE: -40ËC to 85ËC.
STORAGE TEMPERATURE: -40ËC to 95ËC.
Process
SOLDERABILITY:
Max. soldering time and temperature: 5 s at 260ËC
How To Order
Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select
E desired option from each category and place it in the appropriate box.
K12
Series
K12A No snap-in pegs
K12AL No snap-in pegs with central LED
K12P With snap-in pegs
K12PL With central LED
K12C Sealed contact with rubber cap (IP 67)
K12GO Two-step switch without side LED holder
K12GOL K12GO with central LED
Cap Color
NONE version with LED
BK Black cap â No LED
* K12C â 1mm MAX
K12 with LED â 1.5 mm MAX
** K12G & K12GO version only
L
LED Color
NONE No LED
GN
Green
YE
Yellow
OG
Orange
RD
Red
WH White
BU
Blue
Travel*
1 1 mm (0.039)
1.5 1.5 mm (0.059)
2 2 mm (0.079)
Standard LED Code
NONE No LED
L306 Green
L327 Yellow
L315 Orange
L352 Red
L302 White
L328 Blue
Operating Force
1.5N OD 1.5 N without
snap-point
2.5N 2.5 N
3.5N 3.5 N
5N
5N
3.5/7N 3.5/7 N**
6/12N 6/12 N**
Contact
Arrangement
NONE SPST NO (STD)
1R
SPST NC
(Special request)
Eâ10
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
|
▷ |