J01J12AQ Datasheet, PDF (1/3 Pages) ITT Industries – Rocker Switches

Features/Benefits
• Right angle PCB mounting
• Cost-effective solution
• RoHS compliant
Typical Applications
• Modems
• Entertainment devices
• Computer printers
C&K JA Series
Rocker Switches
Models Available
Specifications
CONTACT RATING: Q contact material: 2 AMPS @
125 V AC; 1 AMP @ 250 V AC (UL/CSA). See page H-116 for
additional ratings.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 m Ω typ. initial
@ 2-4 V DC, 100 mA.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC
Materials
HOUSING & ACTUATOR SUPPORT: 6/6 nylon (UL 94V-2), black.
ACTUATOR: 6/6 nylon (UL 94V-2), black.
PLUNGER: Glass filled polyester (UL 94V-0).
CONTACTS & TERMINALS: Q contact material: Copper,
silver plated. See page H-118 for additional contact materials.
SWITCH SUPPORT TERMINALS: Brass, tin plated
(not electrically connected).
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for standard switches.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages H–114 and H–116. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
JA01 SPDT, On-None-On
Actuator
J1 Rocker
Actuator Color
2 Black
3 Red
Terminations
A Right angle, PC thru-hole
Contact Material
Q Silver
Seal
NONE No seal
E Epoxy seal
H-114
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com