GT11MCBE Datasheet, PDF (1/5 Pages) ITT Industries – Sealed Ultraminiature Toggle Switches

C&K GT Series
Sealed Ultraminiature Toggle Switches
Features/Benefits
• Sealed against solder and cleaning
process contaminants
• Ultraminiature size, smallest
footprint available
• Thru-hole and surface mount models
• High temperature materials (UL 94V-0)
• RoHS compliant and compatible
Typical Applications
• Hand-held telecommunications
• Small instrumentation
Specifications
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
cycles at full load.
CONTACT RESISTANCE: Below 50 m Ω typ. initial @
2-4 V DC, 100 mA.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Surface mount switches shipped in anti-static
tape and reel packaging per EIA 481-3, see page G-48 for
drawings and reel information. Tape and cover strip are
conductive for use near statically sensitive components,
consult Customer Service Center.
Materials
HOUSING AND BASE: Glass filled nylon 6/6 or 4/6, flame retardant,
heat stabilized (UL 94V-0).
ACTUATOR: Glass filled nylon 6/6, flame retardant, heat stabilized
(UL 94V-0), with standard internal o-ring seal.
SWITCH SUPPORT: Brass, tin plated.
MOVABLE CONTACTS: Copper alloy, with gold plate over
nickel plate.
STATIONARY CONTACTS: Copper alloy, with gold plate over
nickel plate.
TERMINALS: Gold.
TERMINAL SEAL: Epoxy. All terminals insert molded.
NOTE: For the latest information regarding RoHS compliance, please
go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
How To Order
Complete part numbers for GT Series Sealed Ultraminiature Toggle Switches are shown on pages G–43 thru G–48.
SWITCH FUNCTION
POS.1 POS. 2 POS. 3
PART NUMBER
GT11MCBE
GT11MCBE
GT13MCBE
ON
ON
NONE
OFF
ON
ON
SPDT
Conn. Terms.
2-3
OPEN
2-1
Schematic
.160
(4,06)
.150
(3,81)
.170 DIA. _{.066 DIA.}
.063
(1,60)
.100
(2,54)
C&K MARKING ON .015 TYP.
OPPOSITE SIDE
(0,38)
.100
(2,54)
6
.020 TYP.
(0,51)
4
.177
(4,50)
EPOXY
SEAL
3
2
1
.276
(7,01)
SPDT
GT12MCBE
Conn. Terms.
Schematic
Note: Pins 4 and 6 not connected
OFF
NONE
ON
OPEN
N/A
3-1
SPST
Note: Pins 4 and 6 not connected
.228
(5,79)
.130 TYP.
(3,30)
ACTUATOR SHOWN IN POS. 1
PC MOUNTING
TERMINAL NOS. FOR
REFERENCE ONLY
6
3
GT12-omit hole 2.
4
1
GT12 MODEL
G
TERMINALS 1,3,4 & 6 ONLY
G–43
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com