DA101J12S215QF Datasheet, PDF (1/5 Pages) ITT Industries – Miniature Single Pole Rocker Switches

C&K DA Series
Miniature Single Pole Rocker Switches
Features/Benefits
Typical Applications
• Nice actuator styling with
• Small appliances
multiple options
• Computers and peripherals
• Guards to prevent accidental
actuation
• Medical instrumentation
• Momentary and maintained functions
• IP65 splash proof rubber boot option
Specifications
CONTACT RATING:
UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
VDE: 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
Materials
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated AgSn02ln03.
ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages 4 thru 6. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
DA101 SPDT On-None-On
DA102 SPST On-None-Off
DA103 SPDT On-Off-On
DA12 * SPST On-None-Off
Actuator
J1 Rocker
J2 Two-tone rocker
J3 Illuminated rocker
J4 Circle, illuminated rocker
J5 Oval, illuminated rocker
Actuator Color
2 (STD). Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 (STD.) Snap-in, black
S1 Snap-in, white
B2 Recessed snap-in bracket, black
G2 Guard, black
Termination
15 (STD.) .187” quick connect
17 Solder lug
02 Thru-hole
A Right angle ^{Actuator Marking}
(NONE) (STD.) No marking
D ON-OFF
H ”O l” - international ON-OFF
N Large dot
P ”O -” international ON-OFF
* DA12 - for switches with both marking and illumination
Contact Rating
QF (STD.) Silver
Lamp Rating
(NONE) (STD.) No lamp
6 LED
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inch (mm)
Dimensions subject to change
3
www.ittcannon.com