CL101J72S205QA Datasheet, PDF (1/4 Pages) ITT Industries – Single Pole Power Rocker Switches

C&K CL Series
Single Pole Power Rocker Switches
Features/Benefits
• Illuminated versions available
• Positive detent
• Snap-in mounting
Typical Applications
• Floor care products
• Power outlet strips
• Small appliances
®C
US
Specifications
CONTACT RATING:
UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP;
10 AMPS @ 250 VAC, 1/2 HP.
ELECTRICAL LIFE: 10,000 make and break cycles at full load.
INSULATION RESISTANCE: 108 Ω min.
DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
Materials
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish.
ILLUMINATED ACTUATOR: Polycarbonate, matte finish.
CENTER CONTACTS: Silver plated, copper alloy.
END CONTACTS: Silver plated.
ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages 16 thru 18. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
CL101 SPDT On-None-On
CL102 SPST On-None-Off
CL12 * SPST On-None-Off
Actuator
J7 Rocker
J9 Illuminated rocker
Actuator Color
2 (STD.) Black
1 White
3 Red
R Red, illuminated
A Amber, illuminated
G Green, illuminated
Mounting Style/Color
S2 (STD.) Snap-in, black
S1 Snap-in, white
Termination
05 (STD.) .250” quick connect
Actuator Marking
(NONE) (STD.) No marking
D ON-OFF
H ”O l” - international ON-OFF
P ”O -” international ON-OFF Contact Rating
QA (STD.) Silver
* CL12 - for switches with both marking and illumination
Lamp Rating
(NONE) (STD.) No lamp
7 125 VAC neon
8 250 VAC neon
Dimensions are shown: Inch (mm)
Dimensions subject to change
16
www.ittcannon.com