CCMJ-14C-EL Datasheet, PDF (1/2 Pages) ITT Industries – CCMJ-14C-EL

CCM-J
The CCMJ-014C-E with an ejector
mechanism and landing system opens
new opportunities for future on board
applications. It offers higher reliability,
durability, maximized space savings,
and easy installation. Higher
performance in the most compact
design.
Main applications:
Designed for multiple applications
as follows:
• Intelligent transportation system
• Electronic tool collection
• Electronic fund transfer
• Access control
• Identification
Main features:
• Landing Method, an ITT Cannon
patent, lifts the card to the contacts
with a guaranteed connection and
minimal wiping. The connector itself
is highly durable and protects the IC
card as well. The card is fully inserted
into the connector.
• Smaller dimensions - A lower profile
card connector of 4 mm height
construction.
• Data Security - The sequential delay
time for card extraction between
switch and contact is more than
10m sec.
• Easy installation - no soldering is
necessary. Only a simple connection
of FFC interface cable to the user's
interface connector.
• Reads cards of the ISO standard
7816 (Full size smart card).
• Electromagnetic release version under
development.
Construction
Eject mechanism
Contacts material
Contacts plating
Electrical data
Insulation resistance
Contact resistance max
Current
Dielectric strength
Card detection switch
Rc Card detection switch
Switch current rating
Mechanical data
Number of Contacts
Mechanical Life
Card insertion force
Card ejector button push force
Vibration
Sweep Vibration
Shock
Enviromental Data
Operating Temperature
Steel, Stainless Steel Plate
Copper alloy
Gold alloy inlay
1,000 MΩ min
Max 100 mΩ
Min 10µA / Max 1A
500 Vrms min
Card insertion:
After IC card's terminal is activated, the card
detection switch indicates "off" more than 1m sec.
Card ejection:
When eject button is pushed, card detector is
activated. Then required more than 10m sec delay
time until contact is removed from IC card.
Max 1 mΩ
Min 0.1mA / Max 10mA
8
200,000 cycles
Max 10N
Max 12N
Frequency 33Hz. Acceleration 6.8G
(66.6m/s2) constant.
Duration: vertical 8H, horizontal
(left-right 2H) (forward-backward 2H).
Max dielectric discontinuity 1 µ sec.
Frequency 10 to 200Hz,
Acceleration 5G (50.0m/s2)
constant, Logarithm sweep, sweep speed
10-200-10Hz (15min) Number of sweeps, vertical
8 cycles-2H, horizontal
Peak value 20 G - Duration 6m sec.
3 shocks in each direction of each axis
Max electrical discontinuity 1 µ sec.
-30°C ~ 85°C
Packaging
Connectors are packaged on tray. 6 pieces per tray. Maximum of 30 trays per carton box.
Ordering Code
Part Number
CCMJ-14C-EL
Ejector position
Left
N° of Contacts
8*
*ISO standard
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com