CCM05-5791T30 Datasheet, PDF (1/4 Pages) ITT Industries – CompactFlash Header

CCM05 CF
(CompactFlash^® Header)
The CompactFlash headers are
designed for your board applications
using either Type I or Type II cards.
Features
• 50 contacts with pre-mating pins
• Surface mount single row solder tails
configuration
• Card keying: standard or Reverse
• Low profile version of 4.00 mm
• Metal tabs for additional PCB retention
Physical Data
Contacts
Contact finish (towards the card)
Contact finish (towards the PCB)
Molding
Mechanical Data
Number of contacts
Operating life standard
Card insertion force
Card withdrawal force
Vibration
Mechanical shock
Contact Electrical Data
Operating voltage
Current / ct
Contact resistance
Voltage proof
Insulation resistance
Environmental Data
Operating temperature
Storage temperature
Soldering temperature
Moisture resistance
Corrosion
Ordering Code
CCM05-5791 T30
CCM05-5792 T30
CCM05-5793 T25
CCM05-5794 T30
CCM05-5795 T25
CCM05-5798 T30
Packaging
Tray packaging.
Copper alloy
Gold over nickel
Tin / lead over nickel
High temp. Thermoplastic, UL 94V-0
50
≥ 10,000 cycles
30 N max.
10 N min.
According to MIL-STD-202F. Method 204D
1 0 to 2000 Hz / acceleration peak is 15G.
According to MIL-STD-202F, method 213B
Acceleration is 50G.
100 VAC
≤ 500 mA
≤ 40 mΩ
≥ 500 Vrms
1000 MΩ min.
-20°C / +60°C
-40°C / +85°C
230°C / 5 sec heat peak 235°C max.
40°C / 93% HR / 96 hours. According to
MIL-STD-202F, method 103B,
test condition B
48 hours according to IEC 512 test 11f
Type I normal key stand off, 1,65 mm
Type I normal key
Type II normal key
Type I reverse key stand off, 1,65 mm
Type II reverse key
Type I low profile
CompactFlash is a registered trademark of SanDisk Corporation and CompactFlash Association
Dimensions are shown in mm
Specifications and dimensions subject to change
www.ittcannon.com