CCM05-5782T50 Datasheet, PDF (1/2 Pages) ITT Industries – xD-Picture Card Connector

CCM05 xD
(xD-Picture Card^TM Connector)
For the latest standard in digital
imaging, we propose an ultra small
header to optimize your PCB layout
Features
• Compact design
• Rear metal tab for better PCB
tear-off resistance
• Front cover retention for temper
resistant card entrance
• Card withholding finger
• Hot insertion sequencing managed
by contacts location
• Card detect function done by
double contact on location 1 and 18
Physical Data
Contacts
Contact finish (towards the card)
Contact finish (towards the PCB)
Metal cover
Cover ground tails
Molding
Mechanical Data
Number of contacts
Operating life
Contact force (signal contact)
Card insertion force
Card withdrawal force
Vibration
Mechanical shock
Contact Electrical Data
Voltage / ct
Current / ct
Contact resistance
Voltage proof
Insulation resistance
Environmental Data
Operating temperature
Storage temperature
Soldering temperature
Moisture resistance
Corrosion
Ordering Code
CCM05-5782 T50
Copper alloy
Gold plated over nickel
Tin / lead over nickel
Copper alloy (nickel plated overall)
Gold plated over nickel
High temp. Thermoplastic, UL 94V-0
18
≥ 10,000 cycles
0.20 N min.
10 N max.
2 N min.
According to IEC 512 part 4, test 6d.
10 to 500 Hz / 50m/s² / 3 axis / 2 hours per axis
No discontinuity > 1 µs
Peak value 500 m/s² 11ms. 3 shock in each
direction of each axis. No electrical
discontinuity 1 µs.
≤ 5 Vdc
≤ 500 mA
≤ 100 mΩ
≥ 250 Vrms
1000 MΩ min
-20°C / +85°C
-40°C / +85°C
230°C / 5 sec according to
MIL-STD-202F, method 208
40°C / 93% HR / 96 hours. According to
MIL-STD-202F, method 103B,
test condition B
48 hours according to IEC 512 test 11f
xD card connector
Packaging
50 pieces per tray, 1000 pieces per carton box
Dimensions are shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
xD-Picture Card is a trademark of Fujifilm, Olympus and Toshiba.