|
CCM05-5502R901 Datasheet, PDF (1/5 Pages) ITT Industries – SD, MMC & miniSD | |||
|
CCM05 SD, MMC & miniSD
For one of the most common card
formats, we offer various reading
options in a small and sturdy packag-
ing. This includes the smaller standard
of the miniSD, designed for the mobile
communication needs.
Features
⢠Accept both MMC and SD card
(except 5502)
⢠Standard and reverse reading
⢠Long or short cover
⢠Smooth push push mechanism
Physical Data
Contacts
Contact ï¬nish (towards the card)
Write protect contact
Card detect contact
Contact ï¬nish (towards the PCB)
Metal cover
Cover ground tails
Molding
Mechanical Data
Number of contacts
Operating life standard & reverse type
Operating life push-push type
Contact force (signal contact)
Card insertion force
Card withdrawal force
Vibration
⢠Card detect and write protect
switches
⢠Front metal tab for better PCB
tear-off resistance
⢠Front cover retention for temper
resistant card entrance
Mechanical shock
Contact Electrical Data
Voltage / ct
Current / ct
Contact resistance
Voltage proof
Insulation resistance
Phosphor bronze
Gold over nickel
Copper alloy / nickel overall ï¬nish
Copper alloy / nickel overall ï¬nish
Gold over nickel
Copper alloy / nickel plated overall
Gold plated over nickel
High temp. Thermoplastic, UL 94V-0
7 (MMC), 9 (SD),10 (miniSD)
⥠10,000 cycles
⥠5,000 cycles
0.20 N min.
40 N max.
2 N min.
According to IEC 512 part 4, test 6d.
10 to 500 Hz / 50m/s2 / 3 axis / 2 hours per axis
No discontinuity > 1 µs
Peak value 500 m/s2 11ms. 3 shock in each
direction of each axis. No electrical
discontinuity 1 µs.
⤠5 Vdc
⤠500 mA
⤠100 milliohms
⥠500 Vrms
1000 M⦠min.
⢠Low proï¬le push push connectors
(2.65 mm for SD, 2.10 mm for
miniSD)
Environmental Data
Operating temperature
Storage temperature
Soldering temperature
Moisture resistance
Corrosion
-25°C / +85°C
-40°C / +85°C
230°C / 5 sec according to
MIL-STD-202F, method 208
40°C / 93% HR / 96 hours. According to
MIL-STD-202F, method 103B,
test condition B
48 hours according to IEC 512 test 11f
Ordering Code
CCM05-5502 R901
CCM05-5761 R601
CCM05-5770 T48
CCM05-5772 T45
CCM05-5773 T50
CCM05-5775 T48
CCM05-5776 T50
CCM05-5777 T50
CCM05-5778 T45
MMC card 2 pegs short cover
SD card & MMC stand off
SD card & MMC 2 pegs with chamfer
SD card & MMC 2 pegs push-push
miniSD card
SD card & MMC 2 pegs
miniSD card push-push
SD card & MMC 2 pegs short cover
SD card 2 pegs reverse
Packaging
Please look at part number designation to determine packaging:
T = Tray R = tape on reel - please contact Customer Service for quantity.
Dimensions are shown in mm
Speciï¬cations and dimensions subject to change
www.ittcannon.com
|
▷ |