CCM04-1801 Datasheet, PDF (1/3 Pages) ITT Industries – CCM04 MKII

CCM04 MKII
The CCM04 without card guidance is
used where space is at a premium and
the card guidance can be built around
the connector (rather than provided by
the connector itself).
The CCM04 low profile without card
guidance is dedicated to applications
where the overall height of the
connector is paramount. A range of low
profile CCM04 connectors are available
with 1.25 mm thick moldings.
The wide choice of contact configura-
tions and molding heights suit a broad
range of applications.
Features
• Available in two molding heights 1,25
mm and 2,75 mm.
• The integrated card detection switch
(optional) is sealed against dust and grit.
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
• The height of the contact above the
insulator is 0,75 mm, allowing a wider
tolerance for the card entry slot.
• The contact area is spooned to
reduce the risk of accidental (or
deliberate) damage and to optimize
the electrical connection with the card.
• The tip of the contact is protected by
the molding so that it cannot catch on
the card as the card is being inserted.
• The contact design ensures a
consistent and reliable contact force
over the life of the connector.
• Robustly formed printed circuit tails
are well protected by the insulator
body.
• The moldings are made from high
temperature thermoplastic suited for
infrared and convection soldering
processes.
• With tape and reel packaging as
standard, the connectors are designed
to be automatically picked & placed.
Construction
Contacts
Plating
Moldings
Mechanical Data
Number of Contacts
Mechanical life
Contact force
Card detection switch
actuation force
Vibration
50m/s²
Shock
Contact Electrical Data
Insulation resistance
Resistance
Current rating
Dielectric strength
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Maximum power
Environmental Data
Operating temperature
Soldering temperature
Damp heat
Salt mist
Card detection switch
Ordering Code
Part Number
CCM04-1801
CCM04-1814
CCM04-1889
CCM04-1316
CCM04-1317
Packaging
5 reels per box.
Number of Contacts
6
8
8
8
8
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
6, 8
50,000 cycles min
0.25 N min / 0.5 N max
0.8 N max for actuation (end travel switch
actuates when card is 0,9 mm from
card stop) 1.8 N max for complete
depression
Frequency 10 to 500 Hz. Acceleration
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s² – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally open (closes on card insertion)
100mΩ max
250 Vrms min
1 mA min/ 10 mA max
0.2 VA
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54 For CCM04 1889
Sealed against dust for other versions
Card Presence
Switch
No
No
Yes
Yes
Yes
Quantity per Reel
1800
1300
1000
700
700
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
29