CCM02-1N0-3 Datasheet, PDF (1/2 Pages) ITT Industries – CCM02-1N0-3

CCM02 MK I
CCM02 MK I is a connector with landing
contacts.
Features
• Available with 8 through hole
contacts.
• 100,000 card insertion cycles.
• The contacts do not touch the card
until it is almost fully inserted -
a minimal wiping action removes
any non-conductive material.
• The connector has been designed to
give a positive feel as the card is fully
inserted.
• For added reliability, the integrated
card end-travel switch (which is
normally open) is sealed against dust
and grit.
Construction
Contacts
Plating
Moldings
Mechanical Data
Number of Contacts
Mechanical life
Card insertion force
Card extraction force
Contact force
Vibration
Shock
Contact Electrical Data
Insulation resistance
Resistance
Current rating
Dielectric strength
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Maximum power
Environmental Data
Operating temperature
Soldering temperature
Damp heat
Salt mist
Card detection switch
Ordering Code
Part Number
CCM02-1N0-3
CCM02-1N0-32
CCM02-1N0-35
Packaging
Copper alloy
Contact area : Gold over Nickel
Terminals : Tin lead (2µ min)
Thermoplastic UL 94V-0 rated
8
100,000 cycles min
10 N max
1 N min / 10 N max
0.15 N min / 0.35 N max
Frequency 10 to 500 Hz. Acceleration 50m/s²
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s² – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally open
100 mΩ max
250 Vrms min
1 mA min / 10 mA max
0.2 VA
-40°C to +85°C
Wave: 260°C / 5 sec
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54
Number of Contacts
8
8
8 with extended cover
Packaging Multiple
300
300
200
30 per tray, 10 trays per box.
Exception: CCM02-1NO-35, 20 per tray, 10 per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
13