CCM01-6101 Datasheet, PDF (1/3 Pages) ITT Industries – CCM01-6101

CCM01 MK III
CCM01 MK III connectors are intended
for applications such as pay TV, home
shopping and utility meters. Mainly
driven by the Set Top Box market for
payment and/or deciphering.
Features
• Available in standard or reverse card
reading version, with direct PCB
soldering for reduced installation cost.
• Panel mount version comes with
improved noise reduction FPC, to
accommodate all front panel
configurations.
• Double sided version allows the
customer to insert the card chip up or
down for easier handling.
• Self cleaning card detection switch
(normally closed) is protected against
assembly mishandling.
• Available with 8 through hole contacts
specifically designed to reduce card
wear.
• A chamfer opening to the card entry
slot improves the card guidance into
the connector.
• Variable distance from lower card side
to PCB to level card slot with your front
panel design
• Easy insertion into PCB provided by
four half pegs and termination true
positioning insulator.¹
• Four snap in board locks to lower
stress on soldered terminals and
improve interconnect PCB retention.
• Thermoplastic UL 94 V-0 insulator
suitable for wave soldering only
• Designed to be compatible with:
NDS
EMVCo
Construction
Insulator
Contacts
Contact Finish
PC tail plating
Mechanical Data
Mechanical life
Card insertion force
Card extraction force
Contact force
Vibration
Shock
Contact Electrical Data
Insulation resistance
Resistance
Current rating
Dielectric strength
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Maximum power
Environmental Data
Operating temperature
Soldering temperature
Damp heat
Salt mist
Ordering Code
Designation
Distance from lower card
entrance & PCB
3,90 mm
6,75 mm
6,50 mm
8,00 mm
Panel Mount
Double Decker
1 _{Termination true positioning insulator not}
designed on low profile version 3,9 mm
EMV^TM is a trademark owned by EMVCoLLC.
Packaging
30 per tray, 10 trays per box.
10
EMV^TM compatible
Thermoplastic UL94V-0 rated
Copper alloy
Gold over nickel
Tin lead (2µ min.)
30,000 cycles min
10 N max
1 N min /10 N max
0.20 N min / 0.60 N max
Frequency 10 to 500 Hz. Acceleration 50m/s²
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s² – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally closed
100mΩ max
250 Vrms min
1 mA min / 10 mA max
0.2 VA
-20°C to +70°C
Wave: 260°C / 5 seconds
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Standard Version
CCM01-6101
CCM01-6105
CCM01-6103
CCM01-6301
CCM01-6402
Reverse Version
CCM01-6201
CCM01-6202
CCM01-6302
CCM01-6403
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com