BFH Datasheet, PDF (1/1 Pages) ITT Industries – Hermetically sealed versions of the BFR and TBF receptacle connectors.

Hermetic; MIL-C-5015
BFH/TBFH
The BFH (Bulkhead Fitting) and TBFH
(Thru-Bulkhead Fitting) are hermetically
sealed versions of the BFR and TBF
receptacle connectors. They meet the
requirements of MIL-C-5015.
The TBFH-100 and TBFH-200 are jam nut
mounted with an O-ring for sealing against
the bulkhead. TBFH-100 will accommodate a
panel thickness of 4,75 (.187) through 7,92
(.312) and a TBFH-200 will accommodate a
longer overall length for a panel thickness of
9,52 (.375) through 19,05 (.750)
The square flange mounted TBFH-110 mates
with 3106 and 3108 plugs.
Applications:
• ^{Commercial Aircraft}
• ^Industrial
• ^Military
Product Features
• ^{Meets the requirements of MIL-C-5015.}
• ^{Solder or laser weld mount.}
• ^{Square flange mount.}
For more information: www.ittcannon.com/cat280
• ^{Locknut mount.}
• ^{Pin or socket contacts are available in}
selected layouts.
• ^{Resistance to very high pressure differential}
is achieved using individual glass beads.
However, DWV ratings are lower.
Performance Specifications
Electrical Service Data
Contact Size
Current Rating (max.)✧
Contact Resistance (max.)
Air Leakage Rate
Connector Durability
Contact Retention
Contact Termination
Coupling
DWV
Flange Type
Insulation Resistance
Number of Circuits
Operating Temperature
Service Class
Shell Style
Wire Accommodation
≤1 micron ft³/hr max. (1.04 x 10^–5 cm³/s) at one atmosphere pressure differential
100 mating cycles min.
500 psi min., considerably higher with individual glass seals
Eyelet; PC Tail; Solder
Threaded
Dependent upon contact cavity arrangement
Circular; Flangeless; Hex; Square
5000 MΩ min. at 500 V dc
Up to 75
–54°C to 150°C (–65°F to 302°F) for standard finishes
Hermetically Sealed
Bulkhead
Thru-Bulkhead, Jam Nut Mounting
Thru-Bulkhead, Square Flange
Up to #0 AWG, dependent upon contact cavity arrangement
16
10 A
12.50 mΩ
12
17 A
7.40 mΩ
8
33 A
4.00 mΩ
4
60 A
2.10 mΩ
0
100 A
1.25 mΩ
Materials and Finishes
Description
Shell
Insulator
Contact
O-Ring
Material
Steel
High Grade Plastic
Steel
Nitrile per AN6227
Finish
Clear Chromate over Cadmium^#
—
Clear Chromate over Cadmium^#
—
Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs
✧ This is the maximum current for one single contact. Using MIL-W-5088 and current carried by all contacts within the connector, heat rise can be predicted.
The heat rise must not cause the connector temperature range to be exceeded.
# Additional finishes for high temperature and special applications are available.
Receptacles with a maximum air leakage rate of .01 micron cubic foot per hour are also available.
Version 05.01.03
J-01
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com