AJ3 Datasheet, PDF (1/6 Pages) ITT Industries – AJ3 Joystick for Heavy Duty Applications

AJ3 Joystick for Heavy Duty
Applications
The AJ3 Joystick provides the reliability
required in demanding environmental
conditions such as heavy duty industrial
applications.
The high mechanical strength of the
shaft and the unique sensing design
make the joystick ideal for rigorous use
in rugged, harsh environments.
The AJ3 Joystick is designed to accom-
modate standard and custom-designed
grips.
Standard Features
ț Contactless sensing
ț Life greater than 5 million cycles
ț 2 sensors per axis
ț Integrated temperature compensation
Optional Features
ț Output characteristics
ț PWM frequency
ț Operating force
ț Lever deflection angle
ț Gate pattern
ț Over travel function
ț Grip
Electrical Data
Supply Ratings
Voltage Output
(Maximum output
current 5 mA)
Current Output
PWM Output
CAN Bus Output
Output Center
Position
Other Electrical
Characteristics
Voltage range
8V to 30V
Maximum Current
180 mA at 24V dc
Maximum output voltage Vsupply - 2.5V dc
VO1
0V to Vsupply - 2.5 V dc
VO2
0-5V dc
VO3
0-10V (Ubat min 12.5V) dc
VO4
3-9V (Ubat min 12.5V) dc
VO8
0.5-4.5V dc
CO1
4-20 mA
PW1
122 Hz
CA1
CAN 2.0A
CA2
CAN 2.0B
C2
Voltage (Vsupply)
EMI
RFI
interface
100 V/m
supplied upon request
Pig tail 600 mm without connector
Mechanical data
Life
Operating temperature
Operating force
(measured 140 mm
from pivot point)
Horizontal load maximum
Vertical load maximum
Max. Torque (Z-axis)
Protection level
Gate options
Lever Deflection X/Y
Center position
Weight
Housing Boot
> 5 million cycles
-40°C to + 85°C
4N
8N
12 N
16 N
100 Nm
1000 N
20 Nm
IP 65 above gate
Square, cross, single axis
± 20°
±2°
450 g
Aluminum EPDM
E-6
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com