F9901 Datasheet, PDF (2/7 Pages) Integrated Technology Future – SAW Bandpass Filter F9901

SAW Bandpass Filter F9901
Specifications
Fc = 996.34 MHz
Terminating source impedance : 50Ω
Terminating load impedance : 50Ω
Center Frequency ( Fc )
Insertion Loss (In Fc +/- 15 MHz)
Amplitude Ripple (In Fc +/- 15 MHz)
VSWR (In Fc +/- 15 MHz)
Relative Attenuation
DC ~ 956 MHz
1046 ~ 1097 MHz
Temperature Range (Operational)
Input RF Power (In Fc +/- 15 MHz)
Input/Output Impedance
Minimum
-
-
-
-
Typical
996.34
2.6
0.8
1.6
Maximum
-
4.8
1.6
2.5
Unit
MHz
dB
dBp-p
40
50
-
dB
28
35
-
-30
25
70
℃
-
10
-
dBm
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
NCMC01-F9901
2011-3-8
AS 01
2/7