F9533 Datasheet, PDF (2/7 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter F9533
Specifications
Center Frequency ( Fc )
Insertion Loss (In Fc ±1.0 MHz)
Amplitude Ripple (In Fc ±1.0 MHz)
VSWR (In Fc ±1.0 MHz)
Relative Attenuation
830.0 MHz ~ 840.0 MHz
940.0 MHz ~ 945.0 MHz
945.0 MHz ~ 948.0 MHz
948.0 MHz ~ 950.0 MHz
956.0 MHz ~ 958.0 MHz
Input/Output Impedance
Minimum
-
-
-
-
Typical
953.0
4.5
1.0
2.0
Maximum
-
5.5
2.0
3.0
Unit
MHz
dB
dB
30
35
20
25
15
20
12
16
25
30
50
-
-
dB
-
-
-
Ohm
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
F9533
2008-08-07
NR8006-AS01
2/7