F9155 Datasheet, PDF (2/7 Pages) Integrated Technology Future – SAW Bandpass Filter F9155

SAW Bandpass Filter F9155
Specifications
Fc = 915 MHz
Terminating source impedance : 50Ω
Terminating load impedance : 50Ω
Center Frequency ( Fc )
Insertion Loss (In Fc +/- 5 MHz)
Amplitude Ripple (In Fc +/- 5 MHz)
VSWR (In Fc +/- 5 MHz)
Relative Attenuation
D.C ~ 880 MHz
880 ~ 890 MHz
940 ~ 950 MHz
950 ~ 1600 MHz
Minimum
-
-
-
-
Typical
915
3.0
0.8
1.5
Maximum
-
3.8
1.5
1.8
Unit
MHz
dB
dBp-p
45
50
-
40
52
-
dB
35
40
-
40
48
-
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
NCNC01-F9155
2012-04-17
AS 01
2/7