205604B Datasheet, PDF (2/8 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 205604B
Electrical Specification
Fc = 100MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency at room temp.
Insertion Loss
3dB Bandwidth
Absolute Delay
Relative Attenuation
~ Fo - 0.5 MHz … Fo + 1.0 MHz ~
Temperature Coefficient of Frequency
MHz
dB
MHz
usec
dB
ppm/°C²
Minimum
99.925
-
0.03
-
50
-
Typical
100.000
4.0
0.06
10
55
-0.03
Maximum
100.075
5.5
-
15
-
-
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
205604B
2003-09-24
NI2010-AS02
2/8