203305B Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 203305B
3. Specifications
Fo = 76.945 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
1dB Bandwidth
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/- 1.5 MHz)
Group Delay Variation (Fo +/- 1.5 MHz)
Absolute Delay
Ultimate Rejection
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
MHz
dB
nsec
usec
dB
ppm/°C
Minimum
76.895
-
-
3.84
-
-
-
-
50
-
Typical
76.945
23.5
3.5
3.91
5.5
0.5
80
3.0
55
-94
Maximum
76.995
25.0
-
3.94
5.7
1.0
150
-
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
203305B
2004-04-19
NI0009-CS03
2/5