202549B Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 202549B
3. Specifications
Fo = 160.1 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/- 9.375 MHz)
Group Delay Variation (Fo +/- 9.375 MHz)
Absolute Delay
Ultimate Rejection
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
dB
nsec
usec
dB
ppm/°C
Minimum
160.0
-
19.0
-
-
-
-
50
-
Typical
160.1
24.5
19.45
21.15
0.8
50
1.78
52
-72
Maximum
160.2
25.5
-
21.3
1.0
100
-
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
202549B
2004-06-18
NI2053-CS02
2/5