202539B Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 202539B
3. Specifications
Fo = 160.0 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
1dB Bandwidth
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/- 4.375 MHz)
Group Delay Variation (Fo +/- 4.375 MHz)
Absolute Delay
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
MHz
dB
nsec
usec
ppm/°C
Minimum
159.88
-
-
9.40
-
-
-
-
-
Typical
160.0
27.5
9.15
9.45
10.47
1.0
60
3.46
-23
Maximum
160.12
28.5
-
-
10.5
1.2
150
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
202539B
2004-04-28
NI1001-CS01
2/5