201148B Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 201148B
3. Specifications
Fo = 70.0 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
1dB Bandwidth
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/- 7.0 MHz)
Group Delay Variation (Fo +/- 7.0 MHz)
Absolute Delay
Ultimate Rejection
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
MHz
dB
nsec
usec
dB
ppm/°C
Minimum
69.94
-
-
16.0
-
-
-
-
45
-
Typical
70.0
27.0
15.14
16.27
18.38
0.55
20
1.95
50
-72
Maximum
70.06
28.0
-
-
19.5
0.8
70
-
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
201148B
2004-06-03
NM3021-CS02 2/5