201111B Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 201111B
3. Specifications
Fo = 70 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
1dB Bandwidth
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/- 1.23 MHz)
Group Delay Variation (Fo +/- 1.23 MHz)
Absolute Delay
Ultimate Rejection
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
MHz
dB
nsec
usec
dB
ppm/°C
Minimum
69.92
-
-
3.5
-
-
-
-
50
-
Typical
70.0
25.5
3.2
3.75
5.5
0.8
60
3.33
55
-23
Maximum
70.08
26.5
-
-
6.0
1.1
150
-
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
201111B
2004-04-22
NI0019-CS03
2/5