201091C Datasheet, PDF (2/5 Pages) Integrated Technology Future – SAW Bandpass Filter

SAW Bandpass Filter 201091C
3. Specifications
Fo = 70.0 MHz
Terminating source impedance : 50Ω and matching network
Terminating load impedance : 50Ω and matching network
Center Frequency
Insertion Loss
1dB Bandwidth
3dB Bandwidth
40dB Bandwidth
Amplitude Ripple (Fo +/-0.6 MHz)
Group Delay Variation (Fo +/- 0.6 MHz)
Absolute Delay
Ultimate Rejection
Temperature Coefficient of Frequency
MHz
dB
MHz
MHz
MHz
dB
nsec
usec
dB
ppm/°C²
Minimum
69.96
-
-
1.50
-
-
-
-
48
-
Typical
70.0
23.0
1.45
1.66
2.48
0.5
100
2.98
52
-0.03
Maximum
70.04
25.0
-
-
2.60
0.80
150
-
-
-
Notes :
1) All specifications are based on the matching schematic shown below
2) All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
Rev. Date
Rev.
201091C
2004-03-08
NI0001-CS03 2/5