IS32LT3170 Datasheet, PDF (1/19 Pages) Integrated Silicon Solution, Inc – 10-TO-150MA CONSTANT-CURRENT LED DRIVER FOR AUTOMOTIVE

IS32LT3170/71
10-TO-150MA CONSTANT-CURRENT LED DRIVER FOR AUTOMOTIVE
JUN 2016
GENERAL DESCRIPTION
The IS32LT3170 and IS32LT3171 are adjustable
linear current devices with excellent temperature
stability. A single resistor is all that is required to set
the operating current from 10mA to 150mA. The
devices can operate from an input voltage from 2.5V
to 42V with a minimal voltage headroom of 1V
(typical). Designed with a low dropout voltage; the
device can drive LED strings close to the supply
voltage without switch capacitors or inductors.
The IS32LT3170/71 simplifies designs by
providing a stable current without the additional
requirement of input or output capacitors,
inductors, FETs or diodes. The complete constant
current driver requires only a current set resistor
and a small PCB area making designs both
efficient and cost effective.
The EN pin (1) of the IS32LT3170 can be tied to
Vbat or BCM PWM signal for high side dimming.
The EN Pin (1) of the IS32LT3171 can function as
the PWM signal input used for low side dimming.
As a current sink it is ideal for LED lighting
applications or current limiter for power supplies.
The device is provided in a lead (Pb) free, SOT23-6
package.
FEATURES
 Low-side current sink
- Current preset to 10mA
- Adjustable from 10mA to 150mA with external
resistor selection
 Wide input voltage range from
- 2.5V to 42V (IS32LT3171)
- 5V to 42V (IS32LT3170)
with a low dropout of typical 1V
 Up to 10kHz PWM input (IS32LT3171 only)
 Protection features:
- 0.26%/K negative temperature coefficient at
high temp for thermal protection
 Up to 1W power dissipation in a small SOT23-6
package
 RoHS compliant (Pb-free) package
 Automotive AEC-Q100 qualified
APPLICATIONS
 Automotive and avionic lighting
 Architectural LED lighting
 Channel letters for advertising, LED strips for
decorative lighting
 Retail lighting in fridge, freezer case and
vending machines
 Emergency lighting (e.g. steps lighting, exit way
sign etc.)
TYPICAL APPLICATION CIRCUIT
Figure 1 Typical Application Circuit
Integrated Silicon Solution, Inc. – www.issi.com
1
Rev. A, 06/24/2016