TFP-SMHP25LF-10R0-J Datasheet, PDF (1/3 Pages) IRC - a TT electronics Company. – Surface Mount TO-263 25W Power Resistor

Surface Mount TO-263
25W Power Resistor
SMHP Series
• RoHS compliant
• Popular D2PAK TO263 package
• Resistance values from 0.010Ω to 51KΩ
• Non-inductive design
• Resistor film electrically isolated from copper heat sink tab
• High frequency snubber and pulse handling circuits
Electrical Data
Item
Resistance Range
Tolerance
TCR (ppm/°C)
Nominal Resistance Series
Thermal Resistance
Power Rating
Operating Temperature Range
Maximum Operating
Voltage
Dielectric Widthstanding
Voltage
Solderability *
Specification
Comments
0.01Ω to 0.09Ω 0.1Ω to 9.1Ω 10Ω to 51KΩ
±5%
250
E6
±1%, ±5%
100
E24
±1%, ±5%
50
E24
-55°C to +155°C
Reference Temperature 25°C
Including 2.5Ω and 5.0Ω
3.3°C/W
25W
2.5W
-55°C to +155°C
Resistor hot spot to copper tab
-55°C to +25°C
copper tab temperature
@ 25°C when mounted to a double
sided 2 oz. copper FR-4 board
1” x 1” x .063”(thick) min.
500V not to exceed √P x R
2000 VDC
60 seconds
Min. 90% coverage
230±5°C, 3 seconds
* Soldering Note: During surface mount soldering, the soldering temperature profile must not cause the metal tab of this device to exceed 220°C.
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
SMHP Series Issue July 2008