SM-LGA-6001 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Self inductance under 0.21nH

A1 corner
19.225
Socket/Backing plate outline
16.725±0.050
10.00
20.725±0.050
1.30
13.00
12.00
23.225
Socket/Backing plate outline
5.285
0.85±0.25 Alignment Hole (2)
7.82
6.50
6.00
Backing plate outline
3.00
5.00
2.0
1.71±0.10 THRU
DXF DATA WILL BE PROVIDED
Description: Recommended PCB layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-LGA-6001 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 14.68
Target PCB Recommendations
Total thickness: 0.8mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
STATUS: Released
ENG: B. Schatz
FILE: SM-LGA-6001 Dwg
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 09/11/2014
REV. A
SCALE: 1:1