SM-BGA-9042 Datasheet, PDF (2/6 Pages) Ironwood Electronics. – Highly compliant to accommodate wide co-planarity variations

A1 Corner
9.25
Latch Area
Max Comp height 3.5mm
9.25
17.5325
0.85 THRU (x2)
Non Plated Hole
0.025 A B
1.70±0.10 THRU (x8)
Non Plated Hole
0.05 A B
29.00
23.8625
22.6125 (x3)
20.0725
19.00
Socket Base Overhang Area
Max Comp height 4.5mm
0
19.00
22.6125 (x3)
23.8625
29.00
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9042 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 292.27
STATUS: Released
ENG: V. Panavala
FILE: SM-BGA-9042 Dwg
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
SHEET: 2 OF 6
DRAWN BY: M. Raske
DATE: 10/24/2013
REV. B
SCALE: 2:1