|
SM-BGA-9009 Datasheet, PDF (2/5 Pages) Ironwood Electronics. – Low and stable contact resistance for reliable production yield | |||
|
◁ |
1.25
1.25
3.6125
47.725
17.5325
22.6125 (x8)
3.6125
Latch Area Height Restriction 1.7mm
Socket Base Overhang Area Height Restriction 3mm
Socket Base Contact Area
0.850±0.025 Non-Plated alignment Holes (X2)
20.0725
1.00
0.51 PADS (X680)
1.70±0.10 Non-Plated Mounting Hole (X8)
Latch Area Height Restriction 1.7mm
38.00
45.225
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9009 Drawing
Ironwood Electronics, Inc.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 245.83
STATUS: Released
ENG: E. Smolentseva
FILE: SM-BGA-9009 Dwg
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: same or higher than solder mask
SHEET: 2 OF 5
DRAWN BY: E. Smolentseva
DATE: 4/9/12
REV. B
SCALE: 2:1
|
▷ |