SG-BGA-7042 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Compression plate distributes forces evenly

Recommended PCB Layout
Top View
Orientation Mark
1.25mm±0.13mm (x4)
1.25mm±0.13mm (x4)
Socket Body
Size
1.86mm
9mm
5.08mm
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
SG-BGA-7042 Drawing
© 2005 IRONWOOD ELECTRONICS, INC.
Tele: [phone]
www.ironwoodelectronics.com
*2.11mm
0.5mm typ.
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
Note: Full BGA pattern shown.
Please adjust pattern according
to individual requirements.
2.54mm
Ø 0.85mm±0.025mm (x2)
Non plated alignment hole
Ø 0.28mm pad (x361)
9mm
12.725mm (x4)
15.225mm±0.125mm (x4)
17.73mm sqr.
backing plate outline
Ø 1.61mm±0.05mm (x4)
Non plated mounting hole
All dimensions are in mm unless stated otherwise
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
Status: Released
Drawing: H. Hansen
File: SG-BGA-7042 Dwg
Scale: 4:1
Rev: B
Date: 3/17/05
Modified: 6/2/09, AE
PAGE 2 of 4