SBT-BGA-6006 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Excellent signal integrity at high frequencies

9.8625±0.0250
7.50
0
4.7825
7.50
9.8625±0.0250
24.725±0.125
BACKING PLATE
22.225±0.125
SOCKET BASE
*Note: BGA pattern is not symmetrical
with respect to the mounting holes.
0.85
NON-PLATED HOLE
(x2)
7.3225
0.43 PAD
(x256)
1.70±0.10
NON-PLATED HOLE (4)
Description: Recommended PCB Layout
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SBT-BGA-6006 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 21.08
STATUS: Released
DRAWN BY: D. Hauer
FILE: SBT-BGA-6006
SHEET: 2 OF 4
SCALE: 3:1
DATE: 02/12/10
REV. C