GT-QFN-3010 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Easily removable swivel socket lid

DATUM A IS TOP SIDE OF PCB
C
3.525 Ref
B
1.970 Ref
6.892
4.572
17.725
3.7825
17.725
6.642
5.3380
8.8625
*NOTE: LCC pattern is not symmetrical with respect
to the mounting holes. It is shifted 0.25mm to the
right of center
2X 0.850±0.025 THRU ALL
NON-PLATED
0.025 M A B C
6.3225
22.725
SOCKET BASE
Max. component height 2.3mm
4X 1.70±0.10 THRU ALL
NON-PLATED
0.035 M A B C
8.8625
1.02 TYP
0.600 (44x)
1.60 (44x)
0.025 L A B C
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
GT-QFN-3010 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 20.48
Target PCB Recommendations
Total Thickness: 1.6mm min.
Plating: Gold Immersion, Silver Immersion or Solder
PCB Pad Height: same or higher than solder mask
STATUS: Released
ENG: V.Panavala
FILE: GT-QFN-3010 Dwg
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 10/26/2015
REV. A
SCALE: 4:1