GT-BGA-2015 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Easily removable swivel socket lid

A1 orientation mark
4.500
4.500
1.2825
Note: Full BGA pattern shown.
Please adjust pattern according
to individual requirements.
0.850±0.025 (x4)
non plated alignment holes
6.3625±0.0250 (x2)
3.8225
0.30 pad (x361)
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
9.000 (x4)
6.3625±0.0250
6.3625±0.0250
15.225 socket outline
17.725 backing plate outline
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
GT-BGA-2015 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 12.07
STATUS: Released
ENG: S. Huang
FILE: GT-BGA-2015 Dwg
1.70±0.10 (x4)
non plated mounting hole
SHEET: 2 OF 4
DRAWN BY: S. Huang
DATE: 11/18/14
REV. A
SCALE: 6:1