CG-QFN-7008 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Hinged clamshell socket lid

*Note: QFN pattern is not symmetrical with respect
to the mounting holes. The pattern is shifted to the
1.00*
right of center by 0.25mm.
1.50*
0.50 typ.
30.225±0.125
Socket lid size
3.375
5.70 _5.50
0.25
2.00
0.45
DETAIL K
SCALE 10 : 1
0.85±0.05 (x2)
K
Non plated alignment hole
28.225±0.125
Socket base size
3.00
3.6125
3.6125
1.71±0.10 (x4)
Non plated mounting hole
4.775 (x4)
2.50
2.70
3.75
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
9.725±0.05 (x4)
12.225±0.125
No component area
Description: Recommened PCB Layout
18.00 Socket lid size (x2)
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-QFN-7008 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 33.11
STATUS: Released
ENG: S. Huang
FILE: CG-QFN-7008 Dwg
Max Ht: 9.98mm
Max Ht: 1.88mm
Max Ht: 0.48mm
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 04/09/2014
REV. C
SCALE: 4:1