CG-QFN-7007 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Hinged clamshell socket lid

Hinge Side
A1 Corner
1.700
28.2250
2.7600
1.8625
*Note: QFN pattern is not symmetrical with respect
to the mounting holes. The pattern is shifted to the
right of center by 0.25mm.
0.25*
Socket base outline
0.85±0.025 (X2)
non-plated alignment holes
2.8625
9.725 (x4)
See IC drawing.
1.70±0.05
(X4) non-plated moutning holes
Latch Area
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
3.90
12.00
12.225±0.125 (x4)
20.2250
Description: Recommened PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-QFN-7007 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 33.99
STATUS: Released
ENG: V. Panavala
FILE: CG-QFN-7007 Dwg
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 11/21/2013
REV. C
SCALE: 4:1