English
Language : 

CG-QFN-7000 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware
Recommended PCB Layout
Top View
Orientation Mark
1.25mm±0.13mm (x4)
1.25mm±0.13mm (x4)
Socket Body
Size
1.8625mm
11mm
5.08mm
2.8625mm
Keep out Area (B)
Keep out Area (A)
0.5mm typ.
2.54mm
Ø 0.85mm±0.025mm (x2)
Non plated alignment hole
Ø 0.27mm pad (x291)
Same size as
shown on the package
Keep out Area (A): Max. component height 2.5mm
Keep out Area (B): Max. Component height 10mm
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
CG-QFN-7000 Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: (952) 229-8200
www.ironwoodelectronics.com
11mm
Ø 1.61mm±0.05mm (x4)
Non plated mounting hole
14.725mm (x4)
17.225mm±0.125mm (x4) (No component area)
Status: Released
All dimensions are in mm unless stated otherwise
Recommended PCB Layout Tolerances: ±0.025mm [±0.001”] unless stated otherwise.
Scale: 4:1
Rev: A
Drawing: Vinayak R
File: CG-QFN-7000 Dwg
Date: 3/23/10
Modified:
PAGE 2 of 4