CG-BGA-5020 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – High speed, reliable Elastomer connection

*Note: BGA pattern is not symmetrical with respect
to the mounting holes. The pattern is shifted to the
right of center by 0.25mm.
Note: Full BGA pattern shown.
Please adjust pattern according to
individual requirement.
Orientation Mark
1.70
0.65 typ.
0.85±0.025 (x2)
Non plated alignment hole
0.025 A B
20.2250
1.25mm Max Component Ht.
1.25mm Max Component Ht.
1.95 (x2)
1.8625
4.8625 (x8)
1.25
1.25
3.90 (x4)
12.225±0.125
Socket base size
2.8625
0.35 (x34)
4.5125
1.0125
1.710±0.100 THRU
Non Plated Hole
0.035 A B
Zero Keep out Area
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
PCB Pad height: Same or higher than solder mask
3.00
0.65mm Max Component Ht.
Description: Recommended PCB Layout
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-BGA-5020 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 12.22
STATUS: Released
ENG: V. Panavala
FILE: CG-BGA-5020 Dwg
2.0 (x2)
4.0 (x2)
11.0
SHEET: 2 OF 4
DRAWN BY: M. Raske
DATE: 11/20/2013
28.2250
2.0125
5.5125
2.75 (x4)
REV. A
SCALE: 4:1