CG-BGA-5017 Datasheet, PDF (2/4 Pages) Ironwood Electronics. – Directly mounts to target PCB with hardware

Orientation Mark
1.8625
21.225±0.125
No component area
37.225±0.125
Socket base size
15.00 (x4)
5.08
1.250±0.125 (x4)
2.1125 *
0.50 typ.
*Note: BGA pattern is not symmetrical with respect
to the mounting holes. The pattern is shifted to the
right of center by 0.25mm.
1.6125 *
Note: Full BGA pattern shown.
Please adjust pattern according to
individual requirement.
2.54
0.85±0.05 (x2)
Non plated alignment hole
1.71±0.10 (x4)
Non plated mounting hole
1.250±0.125 (x4)
Max Component Ht. 13.2mm
18.725±0.050 (x4)
Target PCB Recommendations
Total thickness: 1.6mm min.
Plating: Gold or Solder finish
21.225±0.125 (x4)
Socket base size
22.725±0.125 (x4)
Backing plate
Max Component Ht. 1.6mm
Max Component Ht. 0.5mm--close latch
Description: Recommended PCB Layout
Max Component Ht. 1.4mm--open latch
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-BGA-5017 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 69.35
STATUS: Released
DRAWN BY: S. Huang
FILE: CG-BGA-5017
SHEET: 2 OF 4
SCALE: 2.8:1
DATE: 9/14/12
REV. A